Shaft Grounding Brushes
Shaft Earthing Brushes

Installation Examples


LW10015
SOHRE TURBOMACHINERY® INC.TYPE-LW BRUSH.

MOCK-UP OF TYPICAL INSTALLATION.

L10006
SOHRE TURBOMACHINERY® INC. TYPE-L BRUSH IN TURBINE-GENERATOR SERVICE. VIEW OF INTERNAL BRUSH CARTRIDGE AFTER REMOVAL.

L10007
SOHRE TURBOMACHINERY® INC. TYPE-L BRUSHES IN TURBINE-GENERATOR APPLICATION. NOTE: TYPE OF BRUSH MOUNTING FLANGE SHOWN IS NON-STANDARD (BUT IS READILY AVAILABLE). BE SURE TO SPECIFY.

LW10007
SOHRE TURBOMACHINERY® INC. TYPE-LW BRUSH INSTALLATION. TWO BRUSHES ARE INSTALLED IN ONE LOCATION, MOUNTED SIDE-BY-SIDE IN "TWIN" CONFIGURATION.

LW10010
SOHRE TURBOMACHINERY® INC. TYPE-LW/ TWIN SHAFT RIDING BRUSHES IN TURBINE-GENERATOR APPLICATION.

LW10011
SOHRE TURBOMACHINERY® INC. TYPE-LW/ TWIN SHAFT RIDING BRUSHES IN TURBINE-GENERATOR APPLICATION. NOTE EASE OF SERVICING BRUSH WHILE ON-LINE.

LW10013
SOHRE TURBOMACHINERY® INC. TYPE-LW SHAFT RIDING BRUSHES IN TURBINE-GENERATOR APPLICATION.

L10008
SOHRE TURBOMACHINERY® INC. TYPE-L BRUSH IN TURBINE-GENERATOR SERVICE. RAISING SCREW BEING USED TO LIFT BRUSH FROM SHAFT.

Type-A
SOHRE TURBOMACHINERY® INC. TYPE-A SHAFT RIDING BRUSH MOUNTED ON A GEARBOX. (NOTE THAT GROUND WIRE HAD NOT YET BEEN CONNECTED)

L10009
SOHRE TURBOMACHINERY® INC. TYPE-L BRUSH IN TURBINE-GENERATOR SERVICE. REMOVAL OF INTERNAL CARTRIDGE WHILE UNIT ON LINE.

G10001
VOLTAGE CURRENT MONITOR (VCM) (OPTIONAL) by Magnetic Products and Services (MPS).

G10000
SOHRE TURBOMACHINERY® INC. SPECIAL, NON-INDUCTIVE 1 W  RESISTOR
© 1997-2017 Sohre Turbomachinery, Inc. All rights reserved.
Tel: 413-267-0590
Fax: 413-267-0592
info@sohreturbo.com